×

Loading...
Ad by
  • 最优利率和cashback可以申请特批,好信用好收入offer更好。请点链接扫码加微信咨询,Scotiabank -- Nick Zhang 6478812600。
Ad by
  • 最优利率和cashback可以申请特批,好信用好收入offer更好。请点链接扫码加微信咨询,Scotiabank -- Nick Zhang 6478812600。

你try了我说的web site 吗?http://www.diyalarmforum.com/board/index.php?topic=255.0

本文发表在 rolia.net 枫下论坛Older systems (boards with EEPROM RESET pins):

1. Remove all power, AC and battery, from the panel.
2. Short the pins on the panel labeled EEPROM RESET.
3. While maintaining the short, power-up the panel and wait for at least 10 seconds before removing the short.
4. Upon removal of the short, the keypad buzzer will beep and the panel will be reset to the factory default values.

Note: If a series of 10 clicks are heard from a relay on the printed circuit board when applying power, it indicates that the board is locked and cannot be defaulted. The system should be replaced.


Newer systems (boards with no EEPROM RESET pins):

1. Remove all power, AC and battery, from the panel.
2. Remove all wires from the Zone 1 and PGM1 terminals.
3. With a piece of wire short the Zone 1 terminal to the PGM1 terminal.
4. Apply AC power to the main panel.
5. When Zone Light 1 is lit on the keypad the default is complete.
6. Remove AC power from the control
7. Remove the wire from the Zone 1 terminal and the PGM1 terminal.
7. Reconnect all original wiring and power up the control.

Note: If a series of 10 clicks are heard from a relay on the printed circuit board when applying power, it indicates that the board is locked and cannot be defaulted. The system should be replaced.


Again, IF the board defaults, it will need reprogrammed for your particular needs. You cannot reprogram the system unless you spend the requisite time with the manuals.更多精彩文章及讨论,请光临枫下论坛 rolia.net
Report

Replies, comments and Discussions:

  • 枫下家园 / 美丽家居 / VOXCOM 系统,trouble 灯一直亮. 被告之是没电池了.请问哪里去买这种DSC BD4-12电池?
    • 我去年买过一个, 他只shipping, 没有店面。 http://www.baranharper.com/
      • 借问一下,MASTER ACCESSCODE 怎么知道呢?或者怎么复位?原房主没告诉信息
        • 你不可能知道,VOXCOM 也不可能告诉你,如果是DSC你可以try一下5010 或5555。你可以读一读这文章也许有帮助。http://www.diyalarmforum.com/board/index.php?topic=255.0
          • 谢谢. trouble 灯一直亮,按*2,显示8,需要调系统时间. 怎么办?按*6+MASTER ACCESSCODE , 听到BEEP 声,可是没显示. 该怎么办? VOXCOM 去掉了生产厂家,我看了控制器,应该是DSC的,至少电池是.
            • 你try了我说的web site 吗?http://www.diyalarmforum.com/board/index.php?topic=255.0
              本文发表在 rolia.net 枫下论坛Older systems (boards with EEPROM RESET pins):

              1. Remove all power, AC and battery, from the panel.
              2. Short the pins on the panel labeled EEPROM RESET.
              3. While maintaining the short, power-up the panel and wait for at least 10 seconds before removing the short.
              4. Upon removal of the short, the keypad buzzer will beep and the panel will be reset to the factory default values.

              Note: If a series of 10 clicks are heard from a relay on the printed circuit board when applying power, it indicates that the board is locked and cannot be defaulted. The system should be replaced.


              Newer systems (boards with no EEPROM RESET pins):

              1. Remove all power, AC and battery, from the panel.
              2. Remove all wires from the Zone 1 and PGM1 terminals.
              3. With a piece of wire short the Zone 1 terminal to the PGM1 terminal.
              4. Apply AC power to the main panel.
              5. When Zone Light 1 is lit on the keypad the default is complete.
              6. Remove AC power from the control
              7. Remove the wire from the Zone 1 terminal and the PGM1 terminal.
              7. Reconnect all original wiring and power up the control.

              Note: If a series of 10 clicks are heard from a relay on the printed circuit board when applying power, it indicates that the board is locked and cannot be defaulted. The system should be replaced.


              Again, IF the board defaults, it will need reprogrammed for your particular needs. You cannot reprogram the system unless you spend the requisite time with the manuals.更多精彩文章及讨论,请光临枫下论坛 rolia.net
    • 找VOXCOM DEALER,电话:416-454 4520 或 416-3357233
      • Sorry,电话是:416-564 0030